![]() In mode P, the camera automatically adjusts shutter speed and aperture in response to subject brightness. When the camera is turned on, the monitor will turn on. Press the ON/OFF button to turn on the camera.Using basic functions Taking photographs (P mode) Turning on the camera and making the initial settings 58) before connecting the cable again.Ĭharge the battery when the error message shown on the right appears. If “No Connection” is displayed on the back monitor, disconnect the USB cable and set in (P.If the indicator lamp does not light, reconnect the USB cable and USB-AC adapter to the camera.For details on the USB-AC adapter, see “USB-AC adapter” (P. If you received a plug-in type USB-AC adapter, plug it directly into AC outlet.īe sure to unplug the power plug of the USB-AC adapter from the wall outlet when the charging is complete or the playback ends.įor details on the battery, see “Handling the Battery” (P. The included F-2AC USB-AC adapter (hereafter referred to as USB-AC adapter) differs depending on the region where you purchased the camera. Never use any cable other than supplied or Olympus-designated USB cable. Before use, be sure to charge the battery until the indicator lamp turns off (up to 5 hours).įor charging the battery abroad, see “Using your charger and USB-AC adapter abroad” (P. The battery is not fully charged at shipment.When using the camera, be sure to close the battery/card compartment cover.ġ Check that the battery is in the camera, and connect the USB cable and USB-AC adapter.Press the card in until it clicks and comes out slightly, then remove the card.Ĥ Follow Steps (1), (2) and (3) to close battery/card compartment cover. ” Checking the image saving location” (P. This camera can be used without a card by storing images in its internal memory.SD/SDHC/SDXC/Eye-Fi (with Wireless LAN function) card (commercially available) (for compatibility card details, visit the Olympus website.) Do not insert other types of memory cards. Always use the specified cards with this camera.Do not touch the metallic parts of the card directly.Slide the battery lock knob in the Battery lock knob direction of the arrow to unlock, and then remove the battery.ģ Insert the card straight until it clicks into place.Be sure to insert it in the correct direction. If you insert the battery in the wrong direction, the camera is not turned on.Insert the battery as illustrated with the Θ mark toward the battery lock knob. ![]() I can’t say it’s perfect but it’s gone from an image that never saw the light of day to one that I keep on my Flickr photostream.2 Insert the battery while sliding the battery lock knob in the direction of the arrow. Final step was to downsize to 1000px tall using the bicubic sharpener setting and save as jpeg. These are more aggressive settings than I normally use but actually made much less impact on the final image than Focus Magic. Then I downsized to 2000 pixels tall and ran Nik Output Sharpener at a fairly high setting, with the Focus slider pulled up to 30%. ![]() I then cleaned up a few fringes using the clone tool and ran it through Nik Color Efex to correct the colour balance and give the contrast some help. The correction factor was 19, so it’s at the upper end of the corrections that can be done. The sharper version was put into Photoshop CC and first thing I did was run Focus Magic as a layer. The original raw file was converted in Lightroom. So much better than any of the usual sharpening techniques and tools, and so I bought it and use it every now and then when I stuff up a shot that can’t be taken again. About 6 months later I came across Focus Magic and remembered this blurry image as the perfect test. ![]() A quick chimp at the rear screen afterwards didn’t show the focus problem so I thought I was cool and moved on to the next shot.īack at home I saw the problem and had to leave the shot as unsavable. The skater was only above me for a fraction of a second and the camera was set up to ignore such brief changes in focus, so even with an ultra-wide angle lens the shot ended up being focused on the distant sky rather than the guy. The trouble with this was that I completely forgot about how the autofocus would work. So I lay on my back in the bottom of the basin and had the skater come flying over me. I had the idea of shooting from below the skater so I could better see his face. A few years back I was shooting skateboarders at a local park. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |